Product Summary

Aluminium
Brass
Bronze
Copper
Nickel
Solder
Stainless Steel

Production Range

	Chemical Composition
	Element	Content
ETP - Electrolytic Tough Pitch	Copper [Cu]	99.90%
	Oxygen [P]	50 to 400 PPM
	Lead [Sn]	0.005% Max.
	Total Impurity	< 0.02%
DHP- Deoxidised Highly Reduced Phosphorous	Copper [Cu]	99.90%
DHP- Deoxidised Highly Reduced Phosphorous	Phosphorus [P]	0.015% to 0.04%
TBC - Tin Bearing Copper	Copper [Cu]	99.6 % Minimum
	Phosphorus [P]	0.03 % to 0.10 %
	Tin [Sn]	0.07 % to 0.15 %
	Iron [Fe]	0.05 % Max

	Chemical Composition
	Element	Content
Aluminium Bronze	Copper [Cu]	91.0 % to 92.0%
	Aluminium [Al]	4.5 % to 6.5%
	Nickel [Ni]	2% to 2.5%
	Maganese [Mn]	0.50%
Phosphor Bronze Grade-I [ PB-I ]	Tin [Sn]	3.5 % to 4.5%
	Phosphorus [P]	0.03% to 0.35%
	Zinc [Zn]	0.30% Maximum
	Lead [Pb]	0.05 % Maximum
	Copper [Cu]	Remainder %
Phosphor Bronze Grade-II [ PB-II ]	Tin [Sn]	4.2 % to 5.8 %
	Phosphorus [P]	0.02 % to 0.10%
	Zinc [Zn]	0.30% Maximum
	Lead [Pb]	0.05 % Maximum
	Copper [Cu]	Remainder %
Phosphor Bronze Grade-III [ PB-III ]	Tin [Sn]	5.5 % to 7.0 %
	Phosphorus [P]	0.02 % to 0.10%
	Zinc [Zn]	0.30% Maximum
	Lead [Pb]	0.05 % Maximum
	Copper [Cu]	Remainder %
Phosphor Bronze Grade-IV [ PB-IV ]	Tin [Sn]	7.5 % to 9.0 %
	Phosphorus [P]	0.02 % to 0.10%
	Zinc [Zn]	0.30% Maximum
	Lead [Pb]	0.05 % Maximum
	Copper [Cu]	Remainder %

	Chemical Composition
	Element	Content
Aluminium Foil Stock	Aluminum (Al)	99.45 %Min
	Silicon-(Si) + Iron - (Fe)	Remainder
	Copper- (Cu)	0.05 %
	Manganese-( Mn)	0.05 %
	Magnesium- (Mg)	0.05 %
	Zinc- (Zn)	0.05 %
	Titanium- (Ti)	0.03 %
Household foil	Aluminum (Al)	≥ 99.3 %
	Silicon-(Si) + Iron - (Fe)	≤ 0.70 %
	Zinc- (Zn)	≤ 0.10 %
	Copper- (Cu)	≤ 0.10 %
	Titanium- (Ti)	≤ 0.050 %
	Vanadium- (V)	≤ 0.050 %
	Manganese-( Mn)	≤ 0.050 %
	Magnesium- (Mg)	≤ 0.050 %
	Other (Each)	≤ 0.030 %
High Content Aluminium Electric Conduction	Aluminum (Al)	99.50% Min.
	Copper- (Cu)	0.05% Max.
	Manganese-( Mn)	0.05% Max.
	Iron - (Fe)	0.40% Max.
	Zinc- (Zn)	0.10% Max
	Chromium (Cr)	0.01%
	Silicon-(Si)	0.10%
Pharmaceutical Foil	Aluminum (Al)	≤ 98.1 %
	Iron - (Fe)	0.70 - 1.3 %
	Silicon-(Si)	0.050 - 0.30 %
	Copper- (Cu)	≤ 0.050 %
	Zinc- (Zn)	≤ 0.10 %
	Other (Each)	≤ 0.050 %
	Other (Total)	≤ 0.15 %
Container Foil	Aluminum (Al)	97.3 - 98.9 %
	Iron - (Fe)	0.60 - 1%
	Silicon-(Si)	0.50 - 0.90 %
	Manganese-( Mn)	≤ 0.20 %
	Zinc- (Zn)	≤ 0.10 %
	Copper- (Cu)	≤ 0.10 %
	Titanium- (Ti)	≤ 0.080 %
	Chromium (Cr)	≤ 0.050 %
	Magnesium- (Mg)	≤ 0.050 %
	Remainder (Each)	≤ 0.050 %
	Remainder (Total)	≤ 0.15 %

PRODUCT INFORMATION
Standard of reference	ASTM, DIN.BS,ISO,JIS etc.
Thickness Tolerance	Specify in millimeters
Width Tolerance	Specify in millimeters
Temper	DD-SOFT, SOFT, QH, HH, H, EH, SH
Tensile	Range in N/mm2 or psi
Grain Size	In microns or in mm if available
Finish	Surface, Edge, Burr
Camber mm/ 1 meter
Bow mm/ 3 meter